REL S2 Subwoofer

The Rel S2 is a front-firing active subwoofer with down-firing passive radiator, optional wireless capability and the latest 250 watt Class D Amplification.

The S2 is a progression of the R218 subwoofer with improved cabinet rigidity thanks to better internal cabinet bracing which allows more dynamic bass with less blurring of the sound.

The new S series incorporates the usual long throw drive unit arrangement seen in previous models but is again lightened and constructed from T-6063 aerospace alloy in a seamless one piece cone design to improve bass slam and speed.

It is this speed that enables the REL subwoofers to blend seamlessly into 2 channel stereo systems where others fail. When correctly set up not only will you hear improved depth but remarkably the sense of the venue that the music was recorded in becomes far more "Real" along with a sweeter "top end". You really need to get a demonstration of these benefits!

If all that were not enough then it is equally able to shake your fillings out on the latest blockbuster movies when asked and rather cleverly incorporates a wireless receiver that when paired with the optional "Longbow" transmitter offers uncompressed wireless connectivity with a range of around 15 metres and true "Wired" performance.

Type: Front-firing active woofer, down-firing passive radiator
Active Drive Unit: 10 in., 250mm long-throw, die cast Aluminium chassis
Passive Radiator: 10 in., 250mm
Lower Frequency Response in Room: 25Hz at -6 dB
Input Connectors: Hi Level Neutrik Speakon, Left and Right Lo Level phono, LFE phono, SMA for wireless antenna
Gain Control Range: 80 dB
Power Output: 250 watts (RMS)
Phase Switch: Yes, 0 or 180 degrees
Amplifier Type: Class D REL
Longbow Wireless capability: Yes- REL Longbow™ transmitter [required]. Sold separately.
Protection System Fully Electronic with SET-SAFE: Yes D.C. Fault: Yes Output Short: Yes
Mains Input Voltage: 220-240 volts, 110-120 volts for certain markets
Fuses: 3.15 Amp semi delay 220 volts operation 6.3 Amp semi delay 120 volts operation
Dimensions W x H x D, Including Feet and Rear Panel Controls: 13.75 x 14.5 x 16.75 in., (349 x 368 x 425.5 mm) Add 1.75in (44.5mm) in depth when using Hi Level connector
Net Weight: 40 lbs. (18.1 kg)
Shipping Weight: 47.5 lbs. (21.5 kg)
Finish Gloss Piano Black or Gloss White Lacquer

  • AnthemAudiolabAudioquestAudio TechnicaAURALiCArcam
  • B&WChord CompanyChord ElectronicsCyrusDenonDynaudio
  • DynavectorFocalKEFLinnMarantzMonitor Audio
  • NaimNeat AcousticsNovaFidelityOphidian AudioPanasonicPioneer
  • PMCProjectQuadNaim UnitiRegaREL
  • RotelRuark AudioSonosSpendorYamaha

Registered office: 19 Old High Street, Headington, Oxford, OX3 9HS