Linn Majik 2100 power amplifier
Chakra is a simple but highly innovative design perfected by Linn through precision engineering. It offers significantly increased power, reliability and efficiency, whilst at the same time producing less heat, less distortion and using fewer components.
Majik power amplifiers also feature Linn Dynamik Switch Mode Power Supply (SMPS) technology which generates stable, low noise power rails for the audio circuitry, with higher mains noise isolation and efficiency than bulky, noisy conventional power supplies.
To ensure a solid electrical contact between your power amplifier and loudspeakers, Majik power amplifiers use high quality 4mm binding post connections to eliminate any movement in the cable which could adversely affect audio performance.
Majik power amplifiers can be upgraded by the addition of internal Aktiv crossover cards. This makes it simple to improve the performance of your playback system by upgrading to an Aktiv configuration with Linn loudspeakers.
Type Two channel power amplfier
Input connectors (Phono models) RCA Phono
Output connectors 4 mm banana / binding post
Fuse rating 250 V, T10 A
Mains input range • 100 – 120 V ac (±10%) 50 – 60 Hz • 200 – 240 V ac (±10%) 50 – 60 Hz
Mains frequency range 50 – 60 Hz
Max. continuous input power 300 W
Input power - standby 10 W
Gain (Phono models) adjustable for AKTIV (dB) 25.6, 26.6, 27.6, 28.6*, 29.6, 30.6, 31.6, 32.6
Gain (Balanced models) adjustable for AKTIV (dB) 19.6, 20.6, 21.6, 22.6*, 23.6, 24.6 25.6, 26.6
Input impedance 7.5 kOhm
Input level for clipping (Phono models) 755 mV rms
Harmonic distortion Better than 0.01%
Maximum output power (per channel) 100 W rms into 4 Ohms, 56 W rms into 8 Ohms
Load tolerance Unconditionally stable into all loudspeaker loads
Frequency response 1.4 Hz to 41 kHz
Max peak output voltage 28.9 V (max.)
Weight 5 kg / 11.45 lb
Dimensions (excluding connectors) W: 381 mm, D: 355 mm, H: 80 mm (incl. feet)