AudioQuest Irish Red Subwoofer Cable

£79.00

Reg. price £79.00

Price includes VAT

Available to Order

Most products will only take a few days to arrive but please either contact us or call 023 9266 3604 if you would like to check before ordering or if you would like to arrange a demonstration.

Please note we do not ship outside the UK

Request an instore demo
Contact me when an Ex-Demo Model is available
Irish Red is the mid range cable in the canine-themed Subwoofer interconnect range from Audioquest. Offering a tighter, more detailed presentation over Greyhound. Use this Single RCA cable to connect your active "woofer" to an amplifier or AV Receiver.

SOLID .5% SILVER CONDUCTORS FOR IMPROVED SUBWOOFER PERFORMANCE
Solid .5% Silver-Plated Copper Conductors: A superbly cost-effective way to maximize a video or digital cable, harsh and horrible for full-range audio, but like turning up the “sharpness” for a subwoofer, enhancing articulation and intelligibility.

FOAMED-POLYETHYLENE INSULATION
Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

METAL-LAYER NOISE-DISSIPATION SYSTEM
It's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDS "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.

SYMMETRICAL COAX GEOMETRY
Identical positive (+) and negative (-) conductors prevent the shield from being used as an inferior audio conductor.

COLD-WELDED, GOLD-PLATED TERMINATIONS
This plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.

Contact me when this product is available as an ex-demo model

AudioQuest Irish Red Subwoofer Cable

submit
Irish Red Subwoofer cable
  • Tom EvansPrimareMeze AudioSolidSteelTechnicsISOL-8 Teknologies
  • Gold NoteAudiolabAudioquestAudio TechnicaAURALiCArcam
  • B&WChord CompanyChord ElectronicsCyrusDenonDynaudio
  • DynavectorFocalKEFLinnMarantzMonitor Audio
  • NaimNeat AcousticsNovaFidelityOphidian AudioPanasonicPioneer
  • PMCProjectQuadNaim UnitiRegaREL
  • RotelRuark AudioSonosSpendorYamaha

Registered office: 19 Old High Street, Headington, Oxford, OX3 9HS