Audio Technica AT-OC9XSH Shibata MC Cartridge

£570.00

Reg. price £570.00

Price includes VAT

Available to Order

Most products will only take a few days to arrive but please either contact us or call 023 9266 3604 if you would like to check before ordering or if you would like to arrange a demonstration.

Please note we do not ship outside the UK

Request an instore demo
Contact me when an Ex-Demo Model is available
The AT-OC9XSH Dual Moving Coil cartridge with Shibata stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion.

Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and premium permendur yoke that increase the magnetic energy, and the nude Shibata stylus on a boron cantilever that tracks the record groove with incredible accuracy, delivering rich, full-range audio and high transient response. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws – no nuts required.

Features

Dual Moving Coil design, featuring independent coils for both left and right channels, provides outstanding channel separation

The coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion

The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws – no nuts required

Features nude Shibata stylus and boron cantilever for rich full-range audio reproduction and high transient response

A neodymium magnet and permendur yoke provide dramatically increased magnetic energy

Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction

Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer

Type Dual Moving Coil
Body Material Aluminum
Frequency Response 20-47,000 Hz
Channel Separation 27 dB (1 kHz)
Vertical Tracking Angle 20°
Vertical Tracking Force 1.8-2.2 g (2.0 g standard)
Recommended Load Impedance Min. 100 ohms (when head amplifier is connected)
Coil Impedance 12 ohms (1 kHz)
DC Resistance 12 ohms
Coil Inductance 25 mH (1 kHz)
Output 0.4 mV (at 1 kHz, 5 cm/sec)
Channel Balance 1.0 dB (1 kHz)
Stylus Shape Shibata
Stylus Type Nude square shank
Stylus Curvature Radius 2.7 x 0.26 mil
Cantilever 0.28 mm diameter nude boron
Static Compliance 20 x 10-6 cm/dyne
Dynamic Compliance 16 x 10-6 cm/dyne (100 Hz)
Wire Used for Coil PCOCC
Terminal Pins Brass
Mount Half-inch
Weight 7.6 g (0.3 oz)
Dimensions 17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.7 mm (1.01") D
Accessories Included Non-magnetic screwdriver; 2 washers; cartridge installation screws (5 mm × 2, 8 mm × 2, 10 mm x 2, 12 mm x 2); plastic protector; brush Mounting Feature: Threaded body

Contact me when this product is available as an ex-demo model

Audio Technica AT-OC9XSH Shibata MC Cartridge

submit
Audio Technica AT-OC9XSH
  • Tom EvansPrimareMeze AudioSolidSteelTechnicsISOL-8 Teknologies
  • Gold NoteAudiolabAudioquestAudio TechnicaAURALiCArcam
  • B&WChord CompanyChord ElectronicsCyrusDenonDynaudio
  • DynavectorFocalKEFLinnMarantzMonitor Audio
  • NaimNeat AcousticsNovaFidelityOphidian AudioPanasonicPioneer
  • PMCProjectQuadNaim UnitiRegaREL
  • RotelRuark AudioSonosSpendorYamaha

Registered office: 19 Old High Street, Headington, Oxford, OX3 9HS